View HDSP-4600-IJ000_3846091.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

features ? industry standard size ? industry standard pinout 7.62 mm (0.300 inch) dip leads on 2.54 mm (0.100 inch) centers ? choice of colors algaas red, high efficiency red, yellow, green ? excellent appearance evenly lighted segments 50 viewing angle optimum contrast given by gray top surface for algaas red and green devices red top surface for her devices yellow top surface for yellow devices ? design flexibility common anode or common cathode single digits left or right hand decimal point 1. overflow character ? categorized for luminous intensity yellow and green categorized for color use of like categories yields a uniform display ? high light output ? high peak current ? excellent for long digit string multiplexing ? intensity and color selection available see intensity and color selected displays data sheet ? sunlight viewable algaas algaas [1] her [1] yellow green package red hdsp- 5082- 5082- hdsp- description drawing 7610 7620 3600 7.6 mm common anode left hand decimal a 7611 7621 3601 7.6 mm common anode right hand decimal b 7613 7623 3603 7.6 mm common cathode right hand decimal c 7616 7626 3606 7.6 mm universal 1. overflow right hand decimal [2] d e150 7650 7660 4600 10.9 mm common anode left hand decimal e e151 7651 7661 4601 10.9 mm common anode right hand decimal f e153 7653 7663 4603 10.9 mm common cathode right hand decimal g e156 7656 7666 4606 10.9 mm universal 1. overflow right hand decimal [2] h notes: 1. these displays are recommended for high ambient light operation. please refer to the hdsp-e10x algaas and hdsp-335x her data sheet for low current operation. 2. universal pinout brings the anode and cathode of each segments led out to separate pins. see internal diagram d. 3. universal pinout brings the anode and cathode of each segments led out to separate pins. see internal diagram h. devices 5082-761x series 5082-762x series 5082-765x series 5082-766x series hdsp-360x series hdsp-460x series hdsp-e15x series 7.6 mm (0.3 inch)/10.9 mm (0.43 inch) seven segment displays technical data description the 7.6 mm (0.3 inch) and 10.9 mm (0.43 inch) led seven segment displays are designed for viewing distances up to 3 metres (10 feet) and 5 metres (16 feet). these devices use an industry standard size package and pinouts. all devices are available as either common anode or common cathode.
2 part numbering system notes: 1. for codes not listed in the figure above, please refer to the respective datasheet or contact your nearest agilent representative for details. 2. bin options refer to shippable bins for a part number. color and intensity bins are typically restricted to 1 bin per tube (exceptions may apply). please refer to respective datasheet for specific bin limit information. 5082 -x x x x-x x x x x hdsp-x x x x-x x x x x mechanical options [1] 00: no mechanical option color bin options [1,2] 0: no color bin limitation 4: color bin 4 only (applicable for green devices only) b: color bins 2 and 3 (applicable for yellow devices only) maximum intensity bin [1,2] 0: no maximum intensity bin limitation minimum intensity bin [1,2] 0: no minimum intensity bin limitation device configuration/color [1] 0: common anode 1: common anode 3: common cathode device specific configuration [1] refer to respective datasheet package [1] e: 10.9 mm (0.43 inch) single digit seven segment display
3 displays are ideal for portable applications. the high light ambient displays are ideal for high light ambients or long string lengths. for additional informa- tion see the low current seven segment displays, or high light ambient seven segment displays data sheets. notes; 1. dimensions in millimetres and (inches). 2. all untoleranced dimensions are for reference only. 3. redundant anodes. 4. unused dp position. 5. see internal circuit diagram. 6. redundant cathode. 7. see part number table for l.h.d.p. and r.h.d.p. designation. 8. for yellow and green devices only. package dimensions these displays are ideal for most applications. pin for pin equiva- lent displays are also available in a low current or high light ambient design. the low current
4 internal circuit diagram absolute maximum ratings algaas red her yellow green hdsp-e150 5082-7610/ 5082-7620/ hdsp-3600/ description series 7650 series 7660 series 4600 series units average power per segment or dp 96 105 80 105 mw peak forward current per 160 [1] 90 [3] 60 [5] 90 [7] ma segment or dp dc forward current per 40 [2] 30 [4] 20 [6] 30 [8] ma segment or dp operating temperature range -20 to +100 [9] -40 to +100 c storage temperature range -55 to +100 c reverse voltage per 3.0 v segment or dp lead solder temperature for 3 seconds (1.59 mm [0.063 in.] 260 c below seating plane) notes: 1. see figure 1 to establish pulsed conditions. 2. derate above 46 c at 0.54 ma/ c. 3. see figure 6 to establish pulsed conditions. 4. derate above 53 c at 0.45 ma/ c. 5. see figure 7 to establish pulsed conditions. 6. derate above 81 c at 0.52 ma/ c. 7. see figure 8 to establish pulsed conditions. 8. derate above 39 c at 0.37 ma/ c. 9. for operation below -20 c, contact your local agilent components sales office or an authorized distributor.
5 electrical/optical characteristics at t a = 25 c device series parameter symbol min. typ. max. units test conditions luminous intensity/segment [1,2,5] i v 8.5 15.0 mcd i f = 20 ma (digit average) 1.8 v i f = 20 ma forward voltage/segment or dp v f 2.0 3.0 v i f = 100 ma hdsp- e15x peak wavelength l peak 645 nm dominant wavelength [3] l d 637 nm reverse voltage/segment or dp [4] v r 3.0 15 v i r = 100 m a temperature coefficient of d v f / c -2 mv/ c v f /segment or dp thermal resistance led junction- r q j-pin 340 c/w/seg to-pin algaas red device series parameter symbol min. typ. max. units test conditions 5082-761x luminous intensity/segment [1,2,6] 340 800 m cd i f = 5 ma (digit average) i v 5082-765x 340 1115 m cd i f = 5 ma forward voltage/segment or dp v f 2.1 2.5 v i f = 20 ma peak wavelength l peak 635 nm dominant wavelength [3] l d 626 nm all reverse voltage/segment or dp [4] v r 3.0 30 v i r = 100 m a temperature coefficient of d v f / c -2 mv/ c v f /segment or dp thermal resistance led r q j-pin 280 c/w junction-to-pin high efficiency red
6 device series parameter symbol min. typ. max. units test conditions 5082-762x luminous intensity/segment [1,2] 205 620 m cd i f = 5 ma (digit average) i v 5082-766x 290 835 m cd i f = 5 ma forward voltage/segment or dp v f 2.2 2.5 v i f = 20 ma peak wavelength l peak 583 nm dominant wavelength [3,7] l d 581.5 586 592.5 nm all reverse voltage/segment or dp [4] v r 3.0 40 v i r = 100 m a temperature coefficient of d v f / c -2 mv/ c v f /segment or dp thermal resistance led r q j-pin 280 c/w/seg junction-to-pin yellow notes: 1. device case temperature is 25 c prior to the intensity measurement. 2. the digits are categorized for luminous intensity. the intensity category is designated by a letter on the side of the package. 3. the dominant wavelength, l d , is derived from the cie chromaticity diagram and is that single wavelength which defines the color of the device. 4. typical specification for reference only. do not exceed absolute maximum ratings. 5. for low current operation, the algaas hdsp-e10x series displays are recommended. they are tested at 1 ma dc/segment and are pin for pin compatible with the hdsp-e15x series. 6. for low current operation, the her hdsp-335x series displays are recommended. they are tested at 2 ma dc/segment and are pin for pin compatible with the 5082-7650 series. 7. the yellow (5082-7620/7660) and green (hdsp-3600/4600) displays are categorized for dominant wavelength. the category is designated by a number adjacent to the luminous intensity category letter. high performance green device test series parameter symbol min. typ. max. units conditions hdsp-360x luminous intensity/segment [1,2] 860 2700 m cd i f = 10 ma (digit average) i v hdsp-460x 1030 4000 m cd i f = 10 ma forward voltage/segment or dp v f 2.1 2.5 v i f = 10 ma peak wavelength l peak 566 nm dominant wavelength [3,7] l d 571 577 nm all reverse voltage/segment or dp [4] v r 3.0 50 v i r = 100 m a temperature coefficient of d v f / c -2 mv/ c v f /segment or dp thermal resistance led r q j -pin 280 c/w/seg junction-to-pin
7 figure 3. forward current vs. forward voltage. figure 2. maximum allowable dc current vs. ambient temperature. figure 4. relative luminous intensity vs. dc forward current. figure 5. relative efficiency (luminous intensity per unit current) vs. peak current. algaas red figure 1. maximum allowed peak current vs. pulse duration C algaas red. i dc max. ?maximum dc current per segment ?ma 20 0 t a ?ambient temperature ?? 30 90 120 50 30 70 50 algaas red 10 20 5 15 25 35 40 60 80 100 110 40 45 r q j-a = 770?/w i f ?forward current per segment ?ma 0 0 v f ?forward voltage ?v 160 100 60 2.0 4.0 80 20 1.0 3.0 40 algaas red 0.5 1.5 2.5 3.5 120 140 relative luminous intensity (normalized to 1 at 20 ma) 0 0 i f ?forward current per segment ?ma 2.00 1.50 1.25 0.75 0.25 20 40 1.75 1.00 0.50 10 30 5152535 algaas red h peak ?normalized relative efficiency 0.5 0.6 i peak ?peak forward current per segment ?ma 50.0 150.0 1.4 0.8 5.0 1.0 1.2 algaas red
8 her, yellow, green figure 6. maximum tolerable peak current vs. pulse duration C her series. figure 7. maximum tolerable peak current vs. pulse duration C yellow series. figure 8. allowable peak current vs. pulse duration C green series. figure 9. maximum allowable dc current vs. ambient temperature. figure 11. relative luminous intensity vs. dc forward current. figure 10. forward current vs. forward voltage. figure 12. relative luminous efficiency (luminous intensity per unit current) vs. peak current.
9 hdsp-e15x iv bin category min. max. l 8.67 15.90 m 13.00 23.80 n 19.50 35.80 o 29.30 53.60 p 43.90 80.50 intensity bin limits (mcd) algaas red her 5082-761x iv bin category min. max. b 0.369 0.630 c 0.516 0.946 d 0.774 1.418 e 1.160 2.127 f 1.740 3.190 g 2.610 4.785 h 3.915 7.177 5082-765x iv bin category min. max. b 0.347 0.593 c 0.485 0.890 d 0.728 1.333 e 1.091 2.000 f 1.636 3.000 g 2.454 4.500 h 3.682 6.751 yellow 5082-762x iv bin category min. max. b 0.229 0.387 c 0.317 0.582 d 0.476 0.872 e 0.714 1.311 f 1.073 1.967 g 1.609 2.950 h 2.413 4.425 5082-766x iv bin category min. max. c 0.297 0.543 d 0.445 0.817 e 0.669 1.225 f 1.003 1.838 g 1.504 2.758 h 2.256 4.137 hdsp-460x iv bin category min. max. g 1.03 1.88 h 1.54 2.82 i 2.31 4.23 j 3.46 6.34 k 5.18 9.50 l 7.78 14.26 green hdsp-360x iv bin category min. max. h 0.86 1.58 i 1.29 2.37 j 1.94 3.55 k 2.90 5.33 l 4.37 8.01
contrast enhancement for information on contrast enhancement, please see application note 1015. soldering/cleaning for information on soldering leds, please refer to application note 1027. note: all categories are established for classification of products. products may not be available in all categories. please contact your agilent representatives for further clarification/information. dominant wavelength (nm) color bin min. max. yellow 1 581.50 585.00 3 584.00 587.50 2 586.50 590.00 4 589.00 592.50 green 2 573.00 577.00 3 570.00 574.00 4 567.00 571.00 5 564.00 568.00 color categories 10
www.semiconductor.agilent.com data subject to change. copyright ? 2001 agilent technologies, inc. august 27, 2001 obsoletes 5963-7394e (11/99) 5988-3325en

▲Up To Search▲

Price & Availability of HDSP-4600-IJ000

	To Download HDSP-4600-IJ000 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .